Wagner Powder Application Equipment & Powder Paint booths

Technologies / Manual Spray Booths


Manual system Sprint Airfluid X1

Ready to spray setup call us for free Demo!!

  • Corona manual gun with an air-flushed high-performance cascade
  • Constant and reliable coating performance
  • Control unit with a regulated air volume cycle
  • A constant compressed air quantity despite fluctuations in the mains
  • Fully electronic control unit for reproducible results
  • Saving and accessing up to 50 coating programs
  • Diagonal position of the powder container
  • Powder carton is almost completely emptied
  • Mains input voltage
    85 – 250 V
    Input power
     40 W
    Mains frequency
     50 – 60 Hz
    Air inlet pressure
    0,6 – 0,8 MPa, 6,0 – 8,0 bar, 87 – 116 PSI
    Input air connector
     G1/4″ i
    Air output
    0.05 – 20.0 Nm³/h
    Operating temperature
    5 – 45 °C, 41.0 – 113.0 °F
    Weight
    38.0 kg, 83.8 lb
    ——————————————————————————————————————————————
    Downloads



Wagner Powder Application Equipment & Powder Paint booths

MANUAL SPRAY BOOTHS

ID spray wall

for coating of large parts

ID spray wall

  • Slanted air baffles for directing the air current
  • Integratable in automatic coating systems with flow line operation
  • Base frame with stainless steel floor plate
  • Robust, scratch resistant floor
  • Booth on casters
  • Mobile
  • Input voltage
    220 V – 380
    Input frequency
    50 Hz
    Filter area
    30 m², 322.9 ft²
    Compressed air supply
    20 Nm³/h
  • —————————————————————————————————————————————–

ID suspension booth

The ID suspension booth is designed specifically for small series with multiple colors.

  • Spray opening (W x H): 1440 mm x 1530 mm
  • For work pieces up to W=800 mm x H=1200 mm
  • Suspension hooks integrated in roof
  • Reliable grounding of parts
  • Base frame with stainless steel floor plate
  • Robust, scratch resistant floor
  • Booth on casters
  • Mobile
  • Input voltage
    220 – 380 V
    Input frequency
    50 Hz
    Filter area
    30 m², 322.9 ft²
    Compressed air supply
    20 Nm³/h
  • ————————————————————————————————————————-

ID transfer booth

The ID transfer booth is specially designed for the coating of small and large series in flow line operation.

  • Flow opening H=1530 mm x W=500 mm
  • For work pieces up to H=1000 mm x B=300 mm
  • Ceiling slots and inlet/outlet vestibules
  • Integratable in automatic coating systems with flow line operation
  • With stainless steel floor plate
  • Robust, scratch resistant floor
  • Booth on casters
  • Mobile
  • Input voltage
    220 – 380 V
    Filter area
    30 m², 322.9 ft²
    Compressed air supply
    20 Nm³/h
  • —————————————————————————————————————————

BASIC 8000 spray wall


BASIC 8000 spray wall

The BASIC 8000 spray wall is suitable for the coating of large parts and is equipped with the basic functions required for a cost-effective system. It meets the technical requirements specified by CE and ATEX.

  • Suitable for integration in manual conveyor system
  • Small space requirements
  • Slanted air baffles for directing the air current
  • Parts are directly accessible
  • Compact size
  • Low workpiece height
  • Wide range of accessories
  • Input voltage
    230 – 400 V
    Input frequency
    50 Hz
    Filter area
    60 m², 645.8 ft²
    Compressed air supply
    25 Nm³/h
  • —————————————————————————————————————-

BASIC 4000 suspension booth

coating of individual parts

BASIC 4000 suspension booth

The BASIC 4000 suspension booth is suitable for the coating of individual parts or small series and is equipped with the basic functions required for a cost-effective system. It meets the technical requirements specified by CE and ATEX.

  • Coating opening (W x H) 1420 mm x 1420 mm
  • Small footprint
  • Optimal also for medium-sized to small parts
  • Integrated rotatable workpiece suspension hook
  • Integrated suction unit with 4000 m³/h
  • Ergonomic and fatigue-free working conditions through direct accessibility to workpiece
  • Connection for overspray collection bag below housing
          • Input voltage
            230 – 400 V
            Input frequency
            50 Hz
            Filter area
            40 m², 430.6 ft²
            Compressed air supply
            25 Nm³/h
  • ——————————————————————————————————————————————-

ICF filter booths


ICF Integral Compact Filter stainless steel filter booths are designed for automatic powder coating and manual coating. Paint changes can be undertaken by changing the powder and filter trolley.

  • Booth housing and treadable booth floor of stainless steel
  • Easy-to-clean surfaces
  • Robust steel frame support structure
  • Sturdy, indestructible construction
  • Variable suction capacity through modular combination of recovery modules at 8000 m³/h and higher
  • Small footprint and low equipment height
  • Fluid container with integrated sieve, directly equipped with injectors for optimum coating quality
  • Attractive price
  • —————————————————————————————————————————————————————

ICM multicyclone booths


ICM Integral Compact Multicyclone stainless steel booths are designed for automatic powder coating and manual coating in multipaint operation.

  • Booth housing and treadable booth floor of stainless steel
  • Easy-to-clean surfaces
  • Robust steel frame support structure
  • Sturdy, indestructible construction
  • Variable suction capacity through modular combination of recovery modules at 8000 m³/h and higher
  • Small footprint and low equipment height
  • Fluid container with integrated sieve, directly equipped with injectors for optimum coating quality
  • Attractive price
  • ————————————————————————————————————————————————

Total Page Visits: 6985 - Today Page Visits: 1