Image result for POWDER ADDITIVES


TEXTURE ADDITIVE

To produce a Wrinkle finish mix very well 300 g / 20/25 kg) of WRINKLE WIZARD.  Ideally mix 3 kg of powder with 300g of WRINKLE WIZARD and mix afterwards with the rest of the powder.

Supplied 300grams lots.



MATTING ADDITIVE

MATAMOR is a new OXYPLAST development that is able to reduce the gloss of practically all powder coatings, just by dry blending the additive before electrostatic application. Gloss reductions down to 30% of the initial value are currently obtained.

DIRECTIONS FOR USE MATAMOR is dry blended with the powder coating at the chosen concentration, preferably in the fluidized-bed container.                                                                                      

Supplied per kg



ANTI GASSING ADDITIVE

‘Anti Foam C’  we supply an additive for powder coating products to overcome the degassing problems associated when coating sprayed metallized zinc, galvanised steel, metal castings and shot-blasted steel.

Anti Foam C can be added into the fluidized bed hopper or dry blended to box generally by an addition of 3% by weight and considerably reduce or eliminate the craters and micro-blistering associated with degassing problems.              

Please note: Mix well dry blended                                                                                                 

Supplied per kg          


   

PLEASE NOTE:

IT IS HIGHLY RECOMMENDED THAT SEPERATE POWDER HOSES ARE USED AND BE THOROUGH WITH CLEAN DOWNS WHEN USING ANY POWDER ADDITIVE TO PREVENT ANY CROSS CONTAMINATION. ALL ADDITIVES ARE USED AT YOUR ON RISK AND YOU SHOULD EVALUATE THEIR ADVANTAGES AND DISADVANTAGES IN EACH INSTANCE AS THEY MAY VOID ANY WARRANTY THAT MAY BE GIVEN BY THE POWDER MANUFACTURE AND ALSO ANY STANDARDS ATTACHED TO THESE POWDERS.



Total Page Visits: 3138 - Today Page Visits: 1