Paint Spray Booth Denaturant Additives and Peelable Coatings


  gramos-01-300x211

Gramos PDF brochure!

FOR THE COMPLETE RANGE OF AVAILABLE PRODUCTS


Water Wash Paint Booth Denaturants

water-treatment-header-01-01-768x343

“The paint spray-booth water wash system should be well maintained to avoid blocking of the circulation pumps and the build-up of dry overspray around the system”.

Paint coagulation and denaturing chemicals can be used in the water wash sump to ensure the continued functioning of the booth. The chemistry can be adjusted to help the treated overspray sink or float depending on the design of the booth. Our GRAMOSOL,32 and AQUARITE C  caustic based product, provides a very simple to control product to maintain the booth in good order. The idea is that atomised paint particles that are captured in the water system are attacked by the chemistry to make a “soapy layer”. This stops the paint particles all agglomerating together to form sticky mass that would otherwise block the pumps and stick to the spray booth. The treated overspray is then much easier to remove.

Benefits of Gramos Denaturants and Additive products:

  • Increase booth efficiency by reducing downtime.
  • Stops paint re-depositing within the booth.
  • Prevents sticky blockages of pumps and nozzles.
  • Removal of overspray solids made easier.
  • Biocide’s prevent odour causing bacteria.
  • Health and Safety conformance.
  • Reduce disposal costs.
  • Less frequent clean out / sludge disposal.

GRAMOS 32 – (Denaturing)

Gramos 32 is a dust free alkaline powder formulation. The performance of Gramos 32 has been refined over several years to create what may be described, as near as possible , as a general purpose spray booth water treatment product. One of the major advantages that may be gained from the application of Gramos 32 is that this one product be used where there are different types of spray booths operating on the same site. Gramos 32 will successfully denature a considerable range of different paint formulation oversprays to the extent that they will float or sink, according to the booth design, with minimal adhesion of paint residues to working surfaces. Less frequent booth clean outs may be achieved and the recommended working solution of Gramos 32 will ensure control over possible bacterial activity within the denatured paint residues.


AQUARITE C – (Denaturing)

Aquarite C is a dust free powder formulation and is considered to be the optimum product in alkaline powder paint denaturants. It has been developed to be more adaptive to difficult water situations than Gramos 32 and will also successfully denature a wide variety of paint types. Aquarite C will perform satisfactorily in many different spray booth designs. It will quickly denature considerable range of different paint formulation oversprays to the extent that they will float or sink, according to the booth design, with minimal adhesion of paint residues to working surfaces. Less frequent booth clean outs may be achieved and the recommended working solutions of Aquarite C will ensure that the bactericide within its formulation prevents the possible activity of bacteria within the denatured paint residues.


Peelable coatings

peelable-coating  

Protective coatings for booth walls, floors and light systems, products to suit all surfaces and applications. Solvent based for fast curing or water based for sensitive applications.

Peelable coatings can be applied by spray, brush or roller and dry to a semi-permanent smooth bright film enhancing the condition of the spray booth,. When it is time to remove simply peel from the surface, dispose and re-apply a fresh coating.

Peelable coatings are also suitable for temporary surface protection within multiple manufacturing processes, protecting finished surfaces during handling, storage and delivery.

Also ideal within the construction industry, GRAMOS coatings will protect against abrasion, impact, corrosion, paint, resins and bitumen,


AQUAPEEL STANDARD – (Water based peelable wall coating)

A white, water-based, temporary coating designed for application to smooth, clean metal walls in order to provide an easy method of maintenance. The dried film collects paint over-spray and contamination and is readily peelable to enable even heavy over-spray deposits to be quickly and cleanly removed.
Colour: white
Application: Spray, brush or roller
Drying time: 2-3 hrs with good air circ and normal temperature
Coverage: 5 sq. m per litre
Life: Max 3 months
25 Litres


PROPEEL STANDARD – (Solvent based peelable wall coating)

A temporary protective coating designed for application to all smooth, clean metal spray booth walls to provide an easy method of maintenance. Propeel is a white, light-reflective, solvent-based coat, which collects paint over-spray and is readily peelable.
Exposed areas can then be touched in or the entire area re-sprayed as necessary. By providing a white, light reflective surface better working conditions are obtained making for a consistent achievement of high quality work.
Colour: white
Application: Spray, brush, lambswool or mohair roller
Drying time: 30-40 mins
Coverage: 2-3 sq. m per litre
Life: Max 3 months


PROPEEL HD – (Water based, heavy duty, peelable floor coating)

A heavy-duty viscous liquid which dries to leave an off-white, tough, peelable film. This offers a simple, yet effective method of maintaining and protecting non-solvent-sensitive floors and other surfaces from abrasion, paints, oils, resins and dilutes acids and alkalis.
Colour: white
Application: Spray, brush, lambswool or mohair roller
Drying time: 24 hrs with good extraction
Coverage: 1 sq. m per litre
Life: Max 6 months
25 Litres


TACKY SURFACE COATING – (Water based tacky coating)

A water–based solution specifically formulated for application to painted spray booth walls. The film does not completely dry out at ambient temperatures and its tacky surface collects and holds dust thus greatly assisting in keeping the spray booth area free from airborne particles which can be detrimental to the finished article. Once contaminated the coating can be easily washed off with water.
Application: Spray, brush or roller
Drying time: Remains tacky
Coverage: 8-10 sq. m per litre
Life: 2-4 weeks or 50 hrs at low bake temperatures
25 Litres


Total Page Visits: 6983 - Today Page Visits: 1